Tired of working with dead sounding acoustic foam? Want your vocals and music to shine without losing their emotion and energy? Then our unique Acoustic Foam is for you.
More cells with better shapes produce more absorption below 500 Hz. In fact, we absorb 30% at 125 Hz. and 63% at 250 Hz. reaching 100% at 500 Hz. We went after the bottom half of the existing absorption curves to produce a foam that has a smoother absorption curve that goes lower where our vocals start and ends with a smoother, more gradual rate and level of absorption.
You get:
- More absorption below 250 Hz. than standard foams. It absorbs 30% at 125 Hz., 63% at 250 Hz. and 100% at 500 Hz.
- Smoother absorption curve from 125 Hz. – 500 Hz. than any other foam on the market. This range is the heart of your vocal and music frequencies.
- Technology that manages side wall reflections so you can hear the direct sound from your sources and not the reflected energy of your room.
- Available foam sizes and minimum order: 55″ x 75″ x 2″ (5 Sheets)
- Studio foam that lets your vocals and middle range instruments pop.
- A technology that does not drain the life out of your room like so many other foams.
- Foam that finally lets you hear the intimate timbre of the singers voice in every recording. Finally you will have a room that is an acoustical pleasure to record in and very much in demand.
- A foam that comes with variable installation options.
FOAM SIZE CHANGES
Due to current shipping and handling costs for our foam technology, we will only be offering our foam in the XL size. Refer to the link below for this size and all other sizes that you can cut your full sheets into. You can also cut your own sizes that better fit your project needs.
https://www.acousticfields.com/acoustic-foam-overview/
Minimum order for DIY customers is 5 sheets plus shipping and handling to your address. The cost is 1,500.00 USD plus shipping and handling charges. This is the most cost effective way to get our foam to as many DIY clients as we can considering the current logistics, material cost, and labour issues.
The foam pieces can be secured to a wall with a double sided tape single row for smaller pieces and two single rows at each piece top for the larger sizes. The foam XL pieces can easily be cut on a table saw to whatever size your project requires.
Hopefully, this will be a temporary issue and the shipping issues will get resolved. Until then, we must offer our XL size only.
These units have special handling and shipping requirements, due to their weight and size. Please call us on 520-392-9486 or click HERE to contact us so we can assist you further.
